American Oil and Gas Reporter - January 2012 - 260

New literature and product releases featured on these
pages provide company telephone and facsimile
numbers so readers may acquire information about
the brochures and products described. Readers may
telephone the company to obtain additional information, or they may use the fax service by photocopying the page containing a brochure or product
of interest, circling the item, and faxing the photocopy to the number provided. Don't forget to include
your own fax number and mailing address so the
company contacted can respond with the information requested.

Drilling Fluids

Phone: 800-444-0682
Fax: 281-754-8670

Recovery Technology

NEW LITERATURE

Mobile Heating

Phone: 970-241-2069
Fax: 970-243-3171

Certek Heat Machine's new corporate
brochure kicks off by describing the Certek
Heat Machine, a trailer-mounted heating
unit that supports remote monitoring and
runs off diesel, natural gas, or propane. It
then introduces two add-on components the
machine enables: the Hotpod, which heats
large volumes of water efficiently; and the
Hot Orange, a vapor-free, flameless space
heater. Finally, the brochure highlights
oil field applications for the machine and
its accessories, which heat tanks, rigs,
completion and production lines, ponds, and
other equipment, as well as buildings and
pipelines.
❒

Phone: 866-325-4773
Fax: 817-431-6337

Phone: 800-827-3526
Fax: 972-242-8770

Phone: 215-699-8700
Fax: 215-699-0370

Phone: 936-890-1064
Fax: 936-890-9595

260 THE AMERICAN OIL & GAS REPORTER

NeptuneTM Chemical Pump Co.'s brochure describes its series of hydraulic diaphragm metering pumps. After providing tips on pump selection, the
brochure highlights their operational
advantages. It says these include a variable oil bypass design that enhances
valve performance, and electronic stroke
control to adjust flow rate by changing
the stroke length manually or through a
process instrument. It also details Neptune's double diaphragm with leak detection, for use where the pumps' hydraulic fluid must not contaminate
process fluids.
❒

Bolting Tools

Rod Guides
R&M Energy Systems says its updated
New Era® catalog details advanced rod
guides for use with progressing cavity and
reciprocating beam pumps. The guides include PathfinderTM, which reduces pressure
drops by incorporating channels that allow
fluid to flow through rather than around it;
BlazerTM, designed for high-temperature
wells; FASTTM, which can be field applied
to eliminate taking sucker rods from the
site; and Stealth XLTM, which provides superior holding power and a high temperature rating.
❒

Eclipse Oil and Gas Associates' brochure
describes the company as a leading
provider of chemical-based enhanced oil
recovery services. The document says
EOGA specializes in gel polymers for reducing water production from oil and gas
wells, and for in-depth conformance control at injection wells, which improves
reservoir sweep by redistributing water
and/or carbon dioxide into previously
bypassed areas. The company also offers
mobility control polymer and surfactant
floods, the brochure adds. It says EOGA
can screen, engineer and design EOR projects, as well as provide the equipment, personnel, and products to conduct them. ❒

Chemical Pumps

Roller Cone Bits
This brochure on Varel International's
High RollerTM large-diameter, sealed roller
cone drill bits says they combine proven
technology from the High EnergyTM series
with a larger lubricant reservoir to extend
bit life and support demanding applications
such as directional and rotary steerable
drilling. The bits range in diameter from
143⁄4 inches to 181⁄2 inches, and are available
with mill tooth or tungsten carbide insert
cutting structures. The brochure says their
innovations enhance bit life, penetration
rates, directional control, and hydraulic efficiency.
❒

Newpark Drilling Fluids says its corporate brochure describes its focus, capabilities and technology. Products covered
include the new EvolutionTM high-performance, water-based, clay-free polymer system engineered for harsh, unconventional horizontals; two other
high-performance water-based systems;
and several nonaqueous systems, including salt-free invert emulsion systems.
In addition, the brochure expresses
NDF's commitment to fluids innovation
and customer service, and highlights its
strong positions in the United States,
Canada, Brazil, Europe, North Africa,
Australia, New Zealand and India. ❒

Phone: 860-828-1523
Fax: 860-828-1163

Advanced Torque Products' bolting
products brochure describes the company's line of mechanical torque multipliers. The digitally controlled units offer torque ranges from 600 to 40,000
foot-pounds, with ±1 percent accuracy,
even over extreme temperature fluctuations, the company says. Also covered
are drive adapters and mounting fixtures;
hand-held torque wrenches with square
drives ranging in size from 0.25 to 1.0
inches; calibration systems rated to
12,000 foot-pounds; and strain gauges
and load cells for torque measurement.
❒
American Oil and Gas Reporter - January 2012

Table of Contents for the Digital Edition of American Oil and Gas Reporter - January 2012
