ORTHODONTICS ORTHODONTIC INSTRUMENTS Value in Every Smile Ortho Technology Precision manufactured in the USA with USA and/or German high quality 400 series surgical stainless steel, X7 pliers are hand-crafted through 80% of the process. X7 instruments undergo stringent quality control for consistent performance and reliability. The handle is designed for optimal fit and comfort, and they feature contoured corners around the joint area for a slim-line look and feel. The shadow satin surfacing minimizes glare and provide a long-lasting finish. Lifetime Warranty Against Material Defects and Craftsmanship. Sharpening cutters and/ or repairing minor tip damage is not covered by warranty as this is considered to be routine maintenance for normal use. InstrumentsEa 6 @ Hard Wire Cutter Designed to cut hard wires up to .021 " x .025 " (.53 mm x .64 mm). Cutting edge length 0.46 " (11.70 mm). (139-0418) Distal End Cutter Designed to cut all types of wires up to .021 " x .025 " (.53 mm x .64 mm). The head safely holds the cut portion of wire to be discarded. (139-0413) Flush Cut Distal End Cutter Designed to cut and hold archwire distally flush to the buccal tube or bracket while reducing debondings. It is designed for all types of wire up to a maximum of .019 " x .025 " (.48 mm x .64 mm). (139-0415) Replacement Silicone Inserts (139-0391) 3 per Pkg Small Weingart Plier Designed with slim, tapered 20° tips with serrations that offer greater access and versatility for a secure grip of archwires and auxiliaries. (139-0419) Micro Cutter The tapered tips are designed to cut soft wire pins and ligature wires up to .012 " (.30 mm). The slim, short curved tips allow for access into difficult areas with 15o offset tips. Cutting edge length 0.39 " (9.87 mm). (139-0412) Micro Mini Pin & Ligature Cutter Designed to cut soft wire pins and ligature wires up to .012 " (.30 mm). The ultra slim profile, pointed and tapered tips allow access in the most difficult areas. Cutting edge length 0.50 " (12.67 mm). (139-0416) Angulated Debonding Plier Designed with a long handle for added user comfort and high angle design for effective anterior and posterior removal of all bracket style types - stainless steel, ceramic, and plastic brackets. (139-0420) Distal End Cutter with Long Handle Extra long handles designed for additional user comfort. Cuts all types of wires up to .021 " x .025 " (.53 mm x .64 mm) and safely holds the cut portion to be discarded. (139-0414) For pricing information and/or to place an order, visit: www.henryscheindental.com Mini Pin & Ligature Cutter Designed to cut soft wire pins and ligature wires up to .012 " (.30 mm). The slim profile is a plus in difficult to access areas. Cutting edge length 0.50 " (12.67 mm). (139-0417) Section 26-25 NiTi Distal Cinch Back Plier Designed as a multi-use bender for bending NiTi wire up to .025 " (.64 mm). Tie-back NiTi with no heat. (139-0421)