Let's Make a Tiara and a Crown by Victoria Christopherson To start your project: 1. Cut a 20-inch long piece of the wire. 2. Then put ONE bead on the wire and place it in the middle. 3. Now add TWO more beads to one side of the wire, make an "X" by threading the other side of the wire through the same beads. Then PULL the wires TIGHTLY to make the beads into a triangle. Supplies: 28-gauge jewelry wire beads 4 2 Pull Tight 5 3 Pull Tight The "X" 142 Winter 2019 4. Do this again, this time use THREE beads with the middle one a different color. 5. Now repeat this a third time with FOUR beads. Now you have completed the center of your tiara or crown. Pull Tight