BODICE FRONT & INSERTION LACE WORK: Mark the center line of the bodice front and the placement of the insertion lace at the armscye and the seam curve. This will facilitate placement of the insertion lace. Set the first piece of insertion at the armscye, as indicated on bodice front pattern piece. Bring the lace to the center line, placing the bottom of the lace to the exact center. Pin. Now fold the lace back on itself and with a FriXion pen, mark on the lace, the center line of the bodice. Remove from bodice and stitch the marked line on the lace. This will create the miter. Scissor-open the fold, press and trim to ⅟₁₆-inch. Set the lace piece back onto the bodice and pin in place. Repeat the above text for the remaining two mitered insertions. DOLL NEWS * UFDC.ORG 59http://www.UFDC.ORG